Treprostinil Tillomed is administered by continuous subcutaneous or intravenous infusion. Due to the risks associated with chronic indwelling central venous catheters, including serious blood stream infections, subcutaneous infusion (undiluted) is the preferred mode of administration and continuous intravenous infusion should be reserved for patients stabilised with treprostinil subcutaneous infusion and who become intolerant of the subcutaneous route, and in whom these risks are considered acceptable.
The treatment should be initiated and monitored only by clinicians experienced in the treatment of pulmonary hypertension.
Adults
Treatment initiation for patients new to prostacyclin therapy
Treatment should be initiated under close medical supervision in a medical setting able to provide intensive care.
The recommended initial infusion rate is 1.25 ng/kg/min. If this initial dose is poorly tolerated, the infusion rate should be reduced to 0.625 ng/kg/min.
Dose adjustments
The infusion rate should be increased under medical supervision in increments of 1.25 ng/kg/min per week for the first four weeks of treatment and then 2.5 ng/kg/min per week.
The dose should be adjusted on an individual basis and under medical supervision in order to achieve a maintenance dose at which symptoms improve and which is tolerated by the patient.
Efficacy in the main 12 week trials was only maintained if the dose was increased on average 3-4 times per month. The goal of chronic dosage adjustments is to establish a dose at which PAH symptoms are improved, whilst minimising the excessive pharmacological effects of treprostinil.
Adverse effects such as flushing, headache, hypotension, nausea, vomiting and diarrhoea are generally dependent on the dose of treprostinil administered. They may disappear as treatment continues, but should they persist or become intolerable to the patient, the infusion rate may be reduced to diminish their intensity.
During follow-up phases of clinical trials, the mean doses reached after 12 months were 26 ng/kg/min, after 24 months were 36 ng/kg/min, and after 48 months were 42 ng/kg/min.
For patients with obesity (weighing ≥ 30% more than ideal body weight) initial dose and following dose increments should be based on ideal body weight.
Abrupt withdrawal or sudden marked reductions in the dose of treprostinil may cause a rebound in pulmonary arterial hypertension. It is therefore recommended that interruption of treprostinil therapy is avoided and that the infusion is re-started as soon as possible after an abrupt accidental dose reduction or interruption. The optimal strategy for reintroducing treprostinil infusion needs to be determined on a case by case basis by medically qualified personnel. In most cases, after an interruption of a few hours, restarting of treprostinil infusion can be done using the same dose rate; interruptions for longer periods may require the dose of treprostinil to be re-titrated.
In Elderly
Clinical studies of treprostinil did not include sufficient numbers of patients aged 65 years and over to determine whether they respond differently from younger patients. In a population pharmacokinetic (PK) analysis, plasma clearance of treprostinil was reduced by 20%. In general, dose selection for an elderly patient should be cautious, reflecting the greater frequency of decreased hepatic, renal or cardiac function, and of concomitant disease or other drug therapy.
Children and adolescents
There are few data in patients less than 18 years of age. Available clinical studies do not establish whether the efficacy and safety of the recommended posology scheme for adults can be extrapolated to children and adolescents.
At risk populations
Hepatic impairment
Plasma treprostinil exposure (area under the plasma concentration-time curve, AUC) increases by 260% to 510% in mild to moderate hepatic impairment, Child-Pugh classes A and B, respectively. Plasma clearance of treprostinil was reduced up to 80% in subjects presenting with mild to moderate hepatic impairment. Caution is therefore advised when treating patients with hepatic impairment because of the risk of an increase in systemic exposure which may reduce tolerability and lead to an increase in dose-dependent adverse effects.
The initial dose of treprostinil should be decreased to 0.625 ng/kg/min and incremental dose increases should be made cautiously.
Renal impairment
No dose adjustments are required in patients with renal impairment. Treprostinil is not cleared by dialysis [see Pharmacokinetic properties (5.2)].
Method of transition to intravenous epoprostenol treatment
When transition to intravenous epoprostenol is required, the transition phase should be carried out under strict medical supervision. It may be useful for guidance purposes to note the following suggested treatment transition scheme. Treprostinil infusions should first be decreased slowly by 2.5 ng/kg/min. After at least one hour at the new treprostinil dose, epoprostenol treatment can be initiated at a maximum dose of 2 ng/kg/min. The treprostinil dose should then be decreased at subsequent intervals of at least 2 hours, and at the same time the epoprostenol dose is gradually increased after maintaining the initial dose for at least one hour.
Mode of administration
Administration by continuous subcutaneous infusion
Treprostinil Tillomed is administered by continuous subcutaneous infusion via a subcutaneous catheter using an ambulatory infusion pump.
In order to avoid potential interruptions in drug delivery, the patient must have access to a backup infusion pump and subcutaneous infusion sets in the event that the administration equipment should suffer an accidental malfunction.
The ambulatory infusion pump used to administer undiluted Treprostinil Tillomed subcutaneously, should be:
1) small and lightweight,
2) capable of adjusting infusion rates in increments of approximately 0.002 ml/h,
3) fitted with occlusion, low battery, programming error and motor malfunction alarms,
4) accurate to within +/- 6% of the programmed delivery rate
5) positive pressure driven (continuous or pulsated).
The reservoir must be made of polyvinyl chloride, polypropylene or glass.
Patients must be thoroughly trained in the use and programming of the pump, and the connection and care of the infusion set.
Flushing the infusion line whilst connected to the patient may lead to accidental overdose.
Infusion rates ∇ (ml/h) are calculated using the following formula:
| ∇ (ml/h) = D (ng/kg/min) x W (kg) x [0.00006/treprostinil concentration (mg/ml)] |
D = prescribed dose expressed in ng/kg/min
W = body weight of the patient expressed in kg
Treprostinil Tillomed is available in concentrations of 1, 2.5, 5 and 10 mg/ml.
For subcutaneous infusion, Treprostinil Tillomed is delivered without further dilution at a calculated Subcutaneous Infusion Rate (ml/h) based on a patient's Dose (ng/kg/min), Weight (kg) and the Vial Strength (mg/ml) of Treprostinil Tillomed being used. During use, a single reservoir (syringe) of undiluted Treprostinil Tillomed can be administered up to 21 days at 37°C. The subcutaneous infusion rate is calculated using the following formula:

* Conversion factor of 0.00006 = 60 min/hour x 0.000001 mg/ng
Example calculations for Subcutaneous Infusion are as follows:
Example 1:
For a 60 kg person at the recommended initial dose of 1.25 ng/kg/min using the 1 mg/ml Treprostinil Vial Strength, the infusion rate would be calculated as follows:

Example 2:
For a 65 kg person at a dose of 40 ng/kg/min, using the 5 mg/ml Treprostinil Vial Strength, the infusion rate would be calculated as follows:

Table 1 provides guidance for Treprostinil Tillomed 10 mg/ml subcutaneous infusion delivery rates for patients of different body weights corresponding to doses of up to 155 ng/kg/min.
Table 1
Infusion rate setting of subcutaneous pump (ml/h) for Treprostinil Tillomed at a treprostinil concentration of 10 mg/ml |
Patient Weight (Kg) |
Dose (ng/kg/min) | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 |
50 | 0.011 | 0.012 | 0.014 | 0.015 | 0.017 | 0.018 | 0.020 | 0.021 | 0.023 | 0.024 | 0.026 | 0.027 | 0.029 | 0.030 |
55 | 0.012 | 0.013 | 0.015 | 0.017 | 0.018 | 0.020 | 0.021 | 0.023 | 0.025 | 0.026 | 0.028 | 0.030 | 0.031 | 0.033 |
60 | 0.013 | 0.014 | 0.016 | 0.018 | 0.020 | 0.022 | 0.023 | 0.025 | 0.027 | 0.029 | 0.031 | 0.032 | 0.034 | 0.036 |
65 | 0.014 | 0.016 | 0.018 | 0.020 | 0.021 | 0.023 | 0.025 | 0.027 | 0.029 | 0.031 | 0.033 | 0.035 | 0.037 | 0.039 |
70 | 0.015 | 0.017 | 0.019 | 0.021 | 0.023 | 0.025 | 0.027 | 0.029 | 0.032 | 0.034 | 0.036 | 0.038 | 0.040 | 0.042 |
75 | 0.016 | 0.018 | 0.020 | 0.023 | 0.025 | 0.027 | 0.029 | 0.032 | 0.034 | 0.036 | 0.038 | 0.041 | 0.043 | 0.045 |
80 | 0.017 | 0.019 | 0.022 | 0.024 | 0.026 | 0.029 | 0.031 | 0.034 | 0.039 | 0.038 | 0.041 | 0.043 | 0.046 | 0.048 |
85 | 0.018 | 0.020 | 0.023 | 0.026 | 0.028 | 0.031 | 0.033 | 0.036 | 0.038 | 0.041 | 0.043 | 0.046 | 0.048 | 0.051 |
90 | 0.019 | 0.022 | 0.024 | 0.027 | 0.030 | 0.032 | 0.035 | 0.038 | 0.041 | 0.043 | 0.046 | 0.049 | 0.051 | 0.054 |
95 | 0.020 | 0.023 | 0.026 | 0.029 | 0.031 | 0.034 | 0.037 | 0.040 | 0.043 | 0.046 | 0.048 | 0.051 | 0.054 | 0.057 |
100 | 0.021 | 0.024 | 0.027 | 0.030 | 0.033 | 0.036 | 0.039 | 0.042 | 0.045 | 0.048 | 0.051 | 0.054 | 0.057 | 0.060 |
105 | 0.022 | 0.025 | 0.028 | 0.032 | 0.035 | 0.038 | 0.041 | 0.044 | 0.047 | 0.050 | 0.054 | 0.057 | 0.060 | 0.063 |
110 | 0.023 | 0.026 | 0.030 | 0.033 | 0.036 | 0.040 | 0.043 | 0.046 | 0.050 | 0.053 | 0.056 | 0.059 | 0.063 | 0.066 |
115 | 0.024 | 0.028 | 0.031 | 0.035 | 0.038 | 0.041 | 0.045 | 0.048 | 0.052 | 0.055 | 0.059 | 0.062 | 0.066 | 0.069 |
120 | 0.025 | 0.029 | 0.032 | 0.036 | 0.040 | 0.043 | 0.047 | 0.050 | 0.054 | 0.058 | 0.061 | 0.065 | 0.068 | 0.072 |
125 | 0.026 | 0.030 | 0.034 | 0.038 | 0.041 | 0.045 | 0.049 | 0.053 | 0.056 | 0.060 | 0.064 | 0.068 | 0.071 | 0.075 |
130 | 0.027 | 0.031 | 0.035 | 0.039 | 0.043 | 0.047 | 0.051 | 0.055 | 0.059 | 0.062 | 0.066 | 0.070 | 0.074 | 0.078 |
135 | 0.028 | 0.032 | 0.036 | 0.041 | 0.045 | 0.049 | 0.053 | 0.057 | 0.061 | 0.065 | 0.069 | 0.073 | 0.077 | 0.081 |
140 | 0.029 | 0.034 | 0.038 | 0.042 | 0.046 | 0.050 | 0.055 | 0.059 | 0.063 | 0.067 | 0.071 | 0.076 | 0.080 | 0.084 |
145 | 0.030 | 0.035 | 0.039 | 0.044 | 0.048 | 0.052 | 0.057 | 0.061 | 0.065 | 0.070 | 0.074 | 0.078 | 0.083 | 0.087 |
150 | 0.032 | 0.036 | 0.041 | 0.045 | 0.050 | 0.054 | 0.059 | 0.063 | 0.068 | 0.072 | 0.077 | 0.081 | 0.086 | 0.090 |
155 | 0.033 | 0.037 | 0.042 | 0.047 | 0.051 | 0.056 | 0.060 | 0.065 | 0.070 | 0.074 | 0.079 | 0.084 | 0.088 | 0.093 |
Administration by continuous intravenous infusion with an ambulatory pump
Treprostinil Tillomed is administered by continuous intravenous infusion via a central venous catheter using an ambulatory infusion pump. It may also be administered temporarily via a peripheral venous cannula, preferably placed in a large vein. Use of a peripheral infusion for more than a few hours may be associated with an increased risk of thrombophlebitis (see section 4.8).
In order to avoid potential interruptions in drug delivery, the patient must have access to a backup infusion pump and infusion sets in the event that the administration equipment malfunctions.
In general, the ambulatory infusion pump used to administer diluted Treprostinil Tillomed intravenously should:
1) be small and lightweight
2) be capable of adjusting infusion rates in increments of approximately 0.05 ml/h. Typical flow rates would be between 0.4 ml and 2 ml per hour.
3) have occlusion/no delivery, low battery, programming error and motor malfunction alarms
4) have delivery accuracy of ± 6% or better of the hourly dose
5) be positive pressure driven. The reservoir should be made of polyvinyl chloride, polypropylene or glass.
Treprostinil Tillomed should be diluted with either Sterile Water for Injection or 0.9% (w/v) Sodium Chloride Injection and is administered intravenously by continuous infusion, via a surgically placed indwelling central venous catheter, or temporarily via a peripheral venous cannula, using an infusion pump designed for intravenous drug delivery.
When using an appropriate ambulatory infusion pump and reservoir, a predetermined intravenous infusion rate should first be selected to allow for a desired infusion period. The maximum duration of use of diluted treprostinil should be no more than 24 hours (see section 6.3).
Typical intravenous infusion system reservoirs have volumes of 20, 50 or 100 ml. After determination of the required Intravenous Infusion Rate (ml/h) and the patient's Dose (ng/kg/min) and Weight (kg), the Diluted Intravenous Treprostinil Concentration (mg/ml) can be calculated using the following formula:
Step 1

The amount of treprostinil needed to make the required Diluted Intravenous Treprostinil Concentration for the given reservoir size can then be calculated using the following formula:
Step 2

The calculated amount of Treprostinil Tillomed is then added to the reservoir along with a sufficient volume of diluent (Sterile Water for Injection or 0.9% Sodium Chloride Injection) to achieve the desired total volume in the reservoir.
Example calculations for Intravenous Infusion are as follows:
Example 3:
For a 60 kg person at a dose of 5 ng/kg/min, with a predetermined intravenous infusion rate of 1 ml/h and a reservoir of 50 ml, the Diluted Intravenous Treprostinil Solution Concentration would be calculated as follows:
Step 1

The amount of Treprostinil Tillomed (using 1 mg/ml Vial Strength) needed for a total Diluted Treprostinil Concentration of 0.018 mg/ml and a total volume of 50 ml would be calculated as follows:
Step 2

The Diluted Intravenous Treprostinil Concentration for the person in Example 3 would thus be prepared by adding 0.9 ml of 1 mg/ml Treprostinil Tillomed to a suitable reservoir along with a sufficient volume of diluent to achieve a total volume of 50 ml in the reservoir. The pump flow rate for this example would be set at 1 ml/h.
Example 4:
For a 75 kg person at a dose of 30 ng/kg/min, with a predetermined intravenous infusion rate of 2 ml/h and a reservoir of 100 ml, the Diluted Intravenous Treprostinil Solution Concentration would be calculated as follows:
Step 1

The amount of treprostinil (using 2.5 mg/ml Vial Strength) needed for a total Diluted Treprostinil Concentration of 0.0675 mg/ml and a total volume of 100 ml would be calculated as follows:
Step 2

The Diluted Intravenous Treprostinil Concentration for the person in Example 4 would thus be prepared by adding 2.7 ml of 2.5 mg/ml treprostinil to a suitable reservoir along with a sufficient volume of diluent to achieve a total volume of 100 ml in the reservoir. The pump flow rate for this example would be set at 2 ml/h.
Table 2 provides guidance for Treprostinil Tillomed 10 mg/ml for the volume (ml) of treprostinil to be diluted in 20 ml, 50 ml or 100 ml reservoirs (0.4, 1 or 2 ml/h infusion rates, respectively) for patients of differing body weights corresponding to doses of up to 100 ng/kg/min.
Table 2
| Volume (ml) of Treprostinil 10 mg/ml to be diluted in cassettes or syringes 20 ml (0.4 ml/h infusion rate), 50 ml (1 ml/h infusion rate), 100 ml cassette (2 ml/h infusion rate) |
Dose (ng/kg/min) | Body weight of the patient (kg) |
25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 |
50 | 0.375 | 0.450 | 0.525 | 0.600 | 0.675 | 0.750 | 0.825 | 0.900 | 0.975 | 1.050 | 1.125 | 1.200 | 1.275 | 1.350 | 1.425 | 1.500 |
55 | 0.413 | 0.495 | 0/578 | 0.660 | 0.743 | 0.825 | 0.908 | 0.990 | 1.073 | 1.155 | 1.238 | 1.320 | 1.403 | 1.485 | 1.568 | 1.650 |
60 | 0.450 | 0.540 | 0.630 | 0.720 | 0.810 | 0.900 | 0.990 | 1.080 | 1.170 | 1.260 | 1.350 | 1.440 | 1.530 | 1.620 | 1.710 | 1.800 |
65 | 0.488 | 0.585 | 0.683 | 0.780 | 0.878 | 0.975 | 1.073 | 1.170 | 1.260 | 1.350 | 1.463 | 1.560 | 1.658 | 1.755 | 1.835 | 1.950 |
70 | 0.525 | 0.630 | 0.735 | 0.840 | 0.945 | 1.050 | 1.155 | 1.260 | 1.365 | 1.470 | 1.575 | 1.680 | 1.785 | 1.890 | 1.995 | 2.100 |
75 | 0.563 | 0.675 | 0.788 | 0.900 | 1.013 | 1.125 | 1.238 | 1.350 | 1.463 | 1.575 | 1.688 | 1.800 | 1.913 | 2.025 | 2.138 | 2.250 |
80 | 0.600 | 0.720 | 0.840 | 0.960 | 1.080 | 1.200 | 1.320 | 1.440 | 1.560 | 1.680 | 1.800 | 1.920 | 2.040 | 2.160 | 2.280 | 2.400 |
85 | 0.638 | 0.765 | 0.893 | 1.020 | 1.148 | 1.275 | 1.403 | 1.530 | 1.658 | 1.785 | 1.913 | 2.040 | 2.168 | 2.295 | 2.432 | 2.550 |
90 | 0.675 | 0.810 | 0.945 | 1.080 | 1.215 | 1.350 | 1.485 | 1.620 | 1.755 | 1.890 | 2.025 | 2.160 | 2.295 | 2.430 | 2.565 | 2.700 |
95 | 0.713 | 0.855 | 0.998 | 1.140 | 1.283 | 1.425 | 1.568 | 1.710 | 1.853 | 1.996 | 2.138 | 2.280 | 2.423 | 2.565 | 2.708 | 2.850 |
100 | 0.750 | 0.900 | 1.050 | 1.200 | 1.350 | 1.500 | 1.650 | 1.800 | 1.950 | 2.100 | 2.250 | 2.400 | 2.550 | 2.700 | 2.850 | 3.000 |
Training for patients receiving continuous intravenous infusion with an ambulatory pump
The clinical team responsible for the therapy must ensure that the patient is fully trained and competent to use the chosen infusion device. A period of personal instruction and supervision should continue until the patient is judged competent to change infusions, alter flow rates / doses as instructed, and be able to deal with common device alarms. Patients must be trained in proper aseptic technique when preparing the treprostinil infusion reservoir and priming the infusion delivery tubing and connection. Written guidance, either from the pump manufacturer or specifically tailored advice by the prescribing physician, must be made available to the patient. This would include the required normal drug delivery actions, advice on how to manage occlusions and other pump alarms and details of whom to contact in an emergency.
Minimising the risk of catheter-related blood stream infections when using an ambulatory pump
Particular attention must be given to the following to help minimise the risk of catheter-related blood stream infections in patients that are receiving treprostinil via intravenous infusion when using an ambulatory pump (see section 4.4). This advice is in accordance with the current best practice guidelines for the prevention of catheter-related blood stream infections and includes:
General principles
- use of a cuffed and tunnelled central venous catheter (CVC) with a minimum number of ports.
- insertion of the CVC using sterile barrier techniques.
- use of proper hand hygiene and aseptic techniques when the catheter is inserted, replaced, accessed, repaired, or when the catheter insertion site is examined and/or dressed.
- a sterile gauze (replaced every two days) or sterile transparent semi-permeable dressing (replaced at least every seven days) should be used to cover the catheter insertion site.
- the dressing should be replaced whenever it becomes damp, loosened, or soiled or after examination of the site.
- topical antibiotic ointments or creams should not be applied as they may promote fungal infections and antimicrobial resistant bacteria.
Duration of use of diluted treprostinil solution
- the maximum duration of use of the diluted product should be no more than 24 hours.
Use of in-line 0.2 micron filter
- a 0.2 micron filter must be placed between the infusion tubing and the catheter hub, and replaced every 24 hours at the time of changing the infusion reservoir.
Two further recommendations that are potentially important for the prevention of water-borne Gram negative blood stream infections, relate to management of the catheter hub. These include:
Use of a split septum closed hub system
- the use of a closed-hub system (preferably a split septum rather than a mechanical valve device), ensures that the lumen of the catheter is sealed each time the infusion system is disconnected. This prevents the risk of exposure to microbial contamination.
- the split-septum closed hub device should be replaced every 7 days.
Infusion system luer lock inter-connections
The risk of contamination with water-borne Gram negative organisms is likely to be increased if a luer lock inter-connection is wet at the time of exchanging either the infusion line or the closed hub. Therefore:
- swimming and submersion of the infusion system at the site of connection with the catheter hub should be discouraged.
- at the time of replacing the closed-hub device, there should not be any water visible in the luer lock connection threads.
- the infusion line should only be disconnected from the closed hub device once every 24 hours at the time of replacement.