Patient Leaflet Updated 08-Apr-2021 | AstraZeneca UK Limited
Fasenra 30 mg solution for injection in pre filled pen, instructions for use
PATIENT INFORMATION LEAFLET
Instructions for Use
Solution for Injection in Pre-filled Pen
For Subcutaneous Injection
Single-use Pre-filled Pen
Before using your Fasenra Pen, your healthcare provider should show you or your caregiver how to use it correctly.
Read this ‘Instructions for Use’ before you start using your Fasenra Pen and each time you get a refill. There may be new information. This information does not take the place of talking to your healthcare provider about your medical condition or your treatment.
If you or your caregiver have any questions, talk to your healthcare provider.
Store Fasenra in a refrigerator between 2°C to 8°C in its carton until you are ready to use it. Fasenra may be kept at room temperature up to 25°C for a maximum of 14 days. After removal from the refrigerator, Fasenra must be used within 14 days or discarded
Do not use your Fasenra Pen if:
If any of the above happens, throw away the Fasenra Pen in a puncture-resistant sharps container and use a new Fasenra Pen.
Each Fasenra Pen contains 1 dose of Fasenra that is for one-time use only.
Keep Fasenra and all medicines out of the sight and reach of children.
Your Fasenra Pen
Do not remove the cap until you have reached Step 6 of these instructions and are ready to inject Fasenra.
Step 1 - Gather Supplies
Step 2 - Prepare to use your Fasenra Pen
Check the expiry date (EXP). Do not use if the expiry date has passed.
Let Fasenra warm up at room temperature 20°C to 25°C for about 30 minutes before giving the injection.
Do not warm the Fasenra Pen in any other way. For example, do not warm it in a microwave or hot water, or put it near other heat sources.
Use Fasenra within 14 days of removing from the refrigerator.
Do not remove the cap until you have reached Step 6.
Step 3 - Check the liquid
Look at the liquid in the Fasenra Pen through the viewing window. The liquid should be clear and colourless to yellow. It may contain small white particles.
Do not inject Fasenra if the liquid is cloudy, discoloured, or contains large particles.
You may see a small air bubble in the liquid. This is normal. You do not need to do anything about it.
Step 4 - Choose the injection site
The recommended injection site is the front of your thigh. You may also use the lower part of your abdomen.
Do not inject:
A caregiver may inject you in the upper-arm, thigh, or abdomen. Do not try to inject yourself in the arm.
For each injection, choose a different site that is at least 3 cm away from where you last injected.
Step 5 - Clean the injection site
Wash your hands well with soap and water.
Clean the injection site with an alcohol wipe in a circular motion. Let it air dry.
Do not touch the cleaned area before injecting.
Do not fan or blow on the cleaned area.
Step 6 - Pull off the cap
Hold the Fasenra Pen with 1 hand. Carefully pull the cap straight off with your other hand.
Put the cap aside to throw away later.
The green needle guard is now exposed. It is there to prevent you from touching the needle.
Do not try to touch the needle or push on the needle guard with your finger.
Do not try to put the cap back on the Fasenra Pen. You could cause the injection to happen too soon or damage the needle.
Complete the following steps right away after removing the cap.
Step 7 - Inject Fasenra
Follow your healthcare provider’s instructions on how to inject. You can either gently pinch at the injection site or give the injection without pinching the skin.
Inject Fasenra by following the steps in figures a, b, c and d.
Hold the Fasenra Pen in place for the entire injection.
Do not change the position of the Fasenra Pen after the injection has started.
Position the Fasenra Pen at the injection site.
Place the needle guard of the Fasenra Pen flat against your skin (90-degree angle). Make sure you can see the viewing window.
Press down firmly.
You will hear a click. A ‘click’ tells you the injection has started. The green plunger will move down in the viewing window during the injection.
Hold down firmly for 15 seconds.
You will hear a second ‘click’. The second click tells you the injection has finished. The green plunger will fill the viewing window.
Lift the Fasenra Pen straight up.
The needle guard will slide down and lock into place over the needle.
Step 8 - Check the viewing window
Check the viewing window to make sure all the liquid has been injected.
If the green plunger does not fill the viewing window, you may not have received the full dose. If this happens or if you have any other concerns, call your healthcare provider.
Step 9 - Check the injection site
There may be a small amount of blood or liquid where you injected. This is normal.
Gently hold pressure over your skin with a cotton ball or gauze until the bleeding stops.
Do not rub the injection site.
If needed, cover the injection site with a small bandage.
Step 10 - Dispose of the used Fasenra Pen safely
Do not throw away the Fasenra Pen in your household waste.
Throw away the cap and other used supplies in your household waste.
Dispose of the full container as instructed by your healthcare provider or pharmacist.
Do not recycle your used sharps container.
Instructions for Use was last approved in 07/2020
RSP 20 0031
Horizon Place, 600 Capability Green, Luton, Bedfordshire, LU1 3LU
+44 (0)1582 838 000
+44 (0)1582 836 000
0800 783 0033
+44 (0)1582 838 003